Get Threat Model Report help in MIS607 Cybersecurity
Subject Code and Title MIS607 Cybersecurity Assessment Threat Model Report Individual/Group Individual Length 1500 words (+/-10%) Learning Outcomes The Subject Learning Outcomes demonstrated by successful completion of the task below include: Explore and articulate cyber trends, threats and staying safe in cyberspace, plus protecting personal and company data. Analyse issues associated with organisational data networks and security to recommend practical solutions for their resolution. Evaluate and communicate relevant technical and ethical considerations related to the design, deployment and/or the uses of secure technologies within various organisational contexts. Submission Due by 11.55 pm AEST Sunday end of Module 4.1/week7 For intensive class: Due by 11.55 pm AEST Sunday end of Module 4.2/week4 Weighting 30% Total Marks 100 Marks
Assessment Task and Context
The goal of this assessment is to identify the threats or vulnerabilities in the case scenario described in the associated file, Assessment Initial Case Scenario.docx. NOT all threats or vulnerabilities you “discover” are in the initial case scenario. The scenario discusses some elements of the business that are needing mitigation, but you will need to also “discover” other threats or vulnerabilities.
You should use this assessment brief document to guide what to include in this assessment and use the provided case study to help demonstrate understanding of the topic.
To successfully complete this assessment, your MIS607 Assessment 2 MUST include:
- Data Flow Diagram (DFD) – The DFD must relate to the business described in the initial case scenario. You must remember that the DFD is the FIRST step in the “Risk Analysis” process, but it is not the main output of this assessment. The main output of MIS607 Assessment 2 is the categorized threats (see below).
For the DFD section of your report, you will need to present at least a “Context Diagram” and a “Level-0 Diagram”. You can include further levels of DFD (e.g. Level-1, Level-2) if you feel they are needed to show a threat boundary, but it’s not necessary.
The level-0 diagram (and further level diagrams, if needed) must not break the rule for proper DFD formation/development. And the DFDs (excluding the Context Diagram) MUST have labelled threat boundaries.
- Threats Discovery – The main output of MIS607 Assessment 2 should be a table with a set of a minimum of 10 threats or vulnerabilities that need mitigation in the case scenario organisation. Out of these 10 threats or vulnerabilities, choose 3 and explain them in more depth below the table. You will discover these threats or vulnerabilities with the help of the DFDs and the threat boundaries.
Imagine yourself as a consultant called in to work inside the business to discover threats. For this assessment, business acumen and business logic in approaching threats are what is required.
The main threat for this assessment resembles a real-world attack. You need to develop a brief, factual overview of the real-world attack (web links can count as references here since the attack might not yet be covered academically). You are required to reference suggested mitigations, or costs in the real-world attack as this will help enormously with both MIS607 Assessment 2 and Assessment 3 and will be taken into consideration when marking. IMPORTANT NOTE: Any explanation of the real-world case is based on real information/data, NOT speculation or simulated “discovery”.
It is important to understand that you need to “discover” additional threats or vulnerabilities in the associated initial case scenario. The case scenario is only an initial assessment of the organisation. The “discovery” can be simulated based on your simulated investigation. Obviously, you must cover the main threats already identified in the case scenario, but other threats or vulnerabilities should be “discovered” by you. In this regard, inform the reader about what discovery techniques were used. In bullet points inform the audience …. “who you talked to”, “questions you asked” – but keep this very brief (maximum 8-10 bullet points).
- STRIDE Methodology – will be used in this assessment. Note carefully that the DFDs are NOT the main output of this assessment. The main result of this assessment is a “set of threats or vulnerabilities”. Important points to consider are:
- Try to map these threats or vulnerabilities as best you can against threat boundaries;
- And categorize the identified threats or vulnerabilities as best you can, against STRIDE categories.
The STRIDE categories are NOT the threats. Do not be concerned if the threats you discover do not fit all STRIDE categories. In a full real-world assessment with hundreds of threats, this would be the case, but with around 10 threats this will probably not be possible. You can make assumptions, but the report is written from the point of view of a consultant who has made “discoveries” from their investigations. In the simulation, you may gather needed information from stakeholders. Assessment markers are aware that the technical information
“discovered” by you might not be 100% accurate in all details. However, your discoveries
should be somewhat realistic.
Report Structure and Format:
The report should have the following heading structure.
Assignment Cover Sheet (Individual)
(Found via the following link: https://www.torrens.edu.au/policies-forms) Make sure to complete Sections 1, 2 and 3 of the “Assignment Cover Sheet (Individual)” and sign and date it. Once finished, take a screenshot and insert it on the first page of your assessment WORD document as a JPG file.
Mainly this section is where you “Summarize” your report. The best time to write the Executive Summary is when you have finished working on your assessment. By then you will be able to “Summarise” your work. It should be written in a simple and easy to read language. IMPORTANT NOTE: Make sure to ONLY provide the summarized version of the report.
In this section introduce your assessment/report to the reader. Think of the purpose and objectives of your assessment and ask this question yourself why this assessment is valuable and important? You will need to provide a short description of the case scenario. Overall, the introduction section is about “What the assessment is going to be about?”.
2. Main Discussion
IMPORTANT NOTE: The required discussions for sub-sections 2.1, 2.2 and 2.3 are discussed earlier in this assessment brief document (see above).
- Data Flow Diagrams (DFDs)
- Threats Discovery
- Threats List and STRIDE Categorisation
In this section, you will wrap up your discussion in a clear and simple way. Overall, the conclusion section reminds the reader of what the report/assessment has been about. Indicate and discuss the major findings and/or recommendations of your report.
A minimum of three (3) references are required in this assessment. At least one (1) reference needs to be a “peer-reviewed” journal article or a conference paper. IMPORTANT NOTE: You are welcome to use more than three (3) references in your MIS607 Assessment 2 based on your decision and preference; however, the minimum number of references to be used in this assessment is three (3) references.
It is essential that you as the author of your assessment/report use the appropriate APA style for citing and referencing research. Please see more information on referencing here in the Academic Writing Guide found via the Academic Skills website.
Make sure to list the references alphabetically and where possible, make sure to use the most recent references.
5. Appendices (Appendix 1, Appendix 2, etc.)
Overall, there is no need to have an Appendix in this assessment; however, if there is any EXTRA information that you might think of as being necessary for your assessment, you can use this section to highlight it. IMPORTANT NOTE: ALL important and necessary information (e.g. DFDs, Threats, STRIDE, etc.) for your report MUST be inserted and discussed within the report and NOT in the Appendices (Appendix 1, Appendix 2, etc.) section.
IMPORTANT NOTES FOR MIS607 ASSESSMENT 2 SUBMISSION:
- This assessment must be submitted as a WORD document (*.docx OR *.doc).
- Make sure to follow the provided guideline on how to fill in the “Assessment Cover Sheet”.
- The report should use Arial or Calibri fonts, 11 points. It should be line spaced at 1.5 and must have page numbers on the bottom of each page.
- The word count for this assessment is 1500 words (+/- 10%), NOT counting Tables, Figures, Executive Summary, Cover Sheet, References, and Appendices (if any).
- It is highly advised that you read the “case scenario” several times. Then, read through this assessment brief document and take notes for your assessment writing task. Furthermore, make sure to check the Marking Rubric for more information on how marking is completed.
- You must be careful NOT to use up the word count discussing any type of general information such as cybersecurity basics and etc. This is NOT an exercise in summarising class notes and etc. Discussing general information and material will not count towards marks.
- Make sure to use a reasonable number of Tables and Figures in your assessment.
- ALL inserted/used Tables and Figures within the report MUST be captioned/labelled and numbered (e.g. Table 1, Table 2, etc.).
- ALL inserted/used Tables and Figures within the report require being initially introduced and then discussed in a clear, focused and simple way.
- Within the assessment document, when referring to Tables and Figures, you require to refer to them by their captions. NOTE: Tables and Figures without a caption may be treated as if they are not in the report.
- Discovery techniques for your assessment can include interviews, questionnaires, observations, and documentation. You might use other techniques as well. Overall, to “discover threats or vulnerabilities” you can use one of these techniques.
- Leading into MIS607 Assessment 3, try to concentrate on threats with “corresponding controls”. IMPORTANT NOTE: The “controls” are NOT part of MIS607 Assessment 2 but be prepared to find the “controls” for your MIS607 Assessment 3. For instance:
- Weak Passwords: Password policy and/or 2 factor
- Fire: Fire alarms and extinguishers and/or fire insurance,
- Theft: CCTV system
- Please be advised that if you do not perform so well with MIS607 Assessment 2 (Your Assessment 2 mark is less than 60%), you will need to fix the issues noted in your assessment 2 once the feedback is provided and then you must include your MIS607 Assessment 2 in your MIS607 Assessment 3 “Appendix 1” section. IMPORTANT NOTE: There will be NO MARKS for the remediation of MIS607 Assessment 2.
What Are the Reasons You Should Take Experts’ Help for Threat Model Report in MIS607 Cybersecurity?
If you are looking forward to getting help from the experts of Punjab Assignment Help, including the Threat Model Report in MIS607 Cybersecurity and looking for the reason, then here are some points:
- When you lack subject knowledge, you should seek our services to clear the concepts through assignments.
- When you lack a flair for writing, seek help from experts who possess exemplary writing skills to impress your professor easily.
- When you lack time, use our help and deliver your document before the deadline.
We hope you got some solid reasons to order with us for your assignment. And remember! You can contact us at any hour of the day via call, text, or mail, and we will be there to help you through it! So, reach us now!