BN303 Wireless network and Security MIT
|Assessment Details and Submission Guidelines|
|Unit Title||Wireless Networks and Security|
|Assessment Type||Group Submission|
|Assessment Title||Secured design of wireless LAN|
|Purpose of the assessment (with ULO Mapping)||The purpose of the assignment is to design a secured wireless LAN. Students will be able to complete the following ULOs: Apply wireless network security techniques in the context of ethical implications; Design and implement secure enterprise wireless networks.|
|Word limit||Minimum 1500 – Maximum 2000|
|Submission due||27/5/2019 5:00 PM|
|Submission Guidelines||All work must be submitted on Moodle by the due date along with a completed Assignment Cover Page. The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri (Body) font and 2 cm margins on all four sides of your page with appropriate section headings. Reference sources must be cited in the text of the report, and listed appropriately at the end in a reference list using IEEE referencing style.|
|Extension|| If an extension of time to submit work is required, a Special Consideration Application must be submitted on AMS. You must submit this application three working days prior to the due date of the assignment. Further information is available at: http://www.mit.edu.au/about–mit/institute–publications/policiesprocedures–and–guidelines/specialconsiderationdeferment|
|Academic Misconduct|| Academic Misconduct is a serious offence. Depending on the seriousness of the case, penalties can vary from a written warning or zero marks to exclusion from the course or rescinding the degree. Students should make themselves familiar with the full policy and procedure available at:http://www.mit.edu.au/about–mit/institute–publications/policiesprocedures–and–guidelines/Plagiarism–Academic–Misconduct–PolicyProcedure.For further information, please refer to the Academic Integrity Section in your Unit Description.|
Design and implementation of wireless LAN for a small campus with necessary tools and techniques to evaluate the secure wireless connection.
Wireless networks are difficult to manage and secure due to diverse nature of components and open availability of standards compared to wire network. Nowadays, there are number of security practices expected to illustrate why there is a need to implement security tools in WLAN under different attacks. Organizations common practice is to use online interactions with customers and share company related information (may be public and private) in wireless LAN. There are high possibilities that unauthorized users may be received access of the network within the range of the network. The organization needs to prevent the outsider’s access by encrypting the transactions and network ID.
We want to install the WLAN services in a small campus with a limited user. It is necessary to analyse the surrounding environment of the campus to check the possibility of all attack from unauthorized users. Internal area can be grouped to provide wired access to staff members or administrative officers in the campus for faster speed with high security. In order to facilitate internet access to students in different classrooms, library, and/or cafeteria, we may implement WLAN devices with high features or existing may be extended in coverage area.
We propose to extend the internet services from wired network using multiple access points in different locations. There is high concern about the data speed between the wired network and wireless network. Usually, the wired network is connected by high-speed co-axial cable or Fiber optic cable. Our concern is to fulfil of higher data rate requirement by wireless network with the high level of authentication. You can find a set of tools such as WPA or WPA2 used for providing high quality network security. The tools help you to protect the network with high-speed data transmission and large coverage area.
To address these issues, we wantedto discover different types IEEE802.11a/b/g/n wireless networks within range in real time.The tools need to provide information about the network like name, SSID, security strength, source type and basic address of network. The most important thing is the security measurements in wireless networks are different in comparison of wired network. The security ensures the authentication of users in WLAN and the users on the wired network. We recommended doing it by deploying IEEE802.11x authentication that provide authentication for devices trying to connect with other devices on LANs or wireless LANs.
The main objective in this assignment is to implement IEEE 802.1X standard for security over wired or wireless LAN authentications for a campus with any number of users.
Best practices for deploying 802.1X should start with a well thought out plan that includes, but is not limited to, the following considerations:
- Give your proposed WLAN design for the campus. How can you secure your designed network from all kind of attack using WPA or WPA2 technique? Consider the network design with devices that support 802.1X
- Give a single and unified solution IEEE 802.11x network using Protection-capable Management Frames that uses the existing security mechanisms rather than creating new security scheme.
- You need to deploy a secure 802.1X of any suitable (may be Cisco and Xirrus) wireless network to serve 3,000 users of University A. Keep in mind that their challenges are to find a solution that best eased their deployment, devices authentication and troubleshooting tools, and supported their diverse mix of user devices and multi-vendor network equipment. After careful evaluation, you observed that AAA/NAC platform support multi-vendor environments. Deploy a solution that supports all existing infrastructure, and works in multi-vendor environments. For user configuration support, use a solution that supports multiple operating systems such as Windows, Mac OS, and Linux.
Design the network as specified in the above scenario from scratch. You have to submit a group report and specify each individual group member’s contribution on the front page. You should address the following tasks in your report:
For this assignment, you need to complete the following tasks:
- Design the wireless network of campus A according to given specification in the given case study (Diagrams can be designed using MS Visio or any other available network design software).
- Establish the network security by using WPA or WPA2.
- List the security requirements for wired network and wireless network of campus A stated in the case study.
- Provide 802.1x authentication mechanism required wireless network according to the wired network of the Report. Furthermore, the network security management mechanism for further solutions should be based on the existing security scheme.
All group members:
Write the report with detail steps that explains all the solutions and implement theIEEE802.11x security demonstration using WPA or WPA2 (in the demonstration you need to consider how to user connect to the WLAN through the access point). Also, give the plan to extend the network for more users using multiple access points.
Write a report that includes the following sections: abstract, introduction that contains brief history, network components etc, proposed solution along with figure, your future recommendations, and conclusions.
Marks are allocated as indicated on each question, taking the following aspects into account: Note: The marking criteria varies for each assignment
|Section to be included in the report||Description of the section||Marks|
|Abstract||Aims and objectives of this report||5|
|Introduction||History of WLAN, network components, and outline of report.||10|
|Analyse||Analyse the problem of providing security of the above campus network using WPA or WPA2||10|
|Design||Create a design part of the proposed solution with suitable diagram||10|
|Evaluation/justification||Evaluate your proposed solutions and write justification of your evaluation||5|
|Conclusion||Briefly summarized the outcomes of the work using 2/3 sentences.||5|
|Reference style||Follow IEEE reference style||5|
Marking Rubric for Assignment #2: Total Marks 50
Note: The marking rubrics varies for each assignment
|Grade Mark||HD 40-50||DI 35-44||CR 30-34||P 25-29||Fail <25|
|Abstract /5||Clearly written the goal of the work||Soundly written the goal of the work||Usually written the goals||Briefly presented the goals||Did not mention the goal|
|Introduction /10||All topics are pertinent and covered in depth. Ability to think critically and source material is demonstrated||Topics are relevant and soundly analysed.||Generally relevant and analysed.||Some relevance and briefly presented.||This is not relevant to the assignment topic.|
|Analyse /10||Logic is clear with strong arguments||Consistency logical and convincing||Mostly consistent logical and convincing||Adequate cohesion and conviction||Argument is not clearly stated|
|Design /10||All elements are present with required diagram.||Components present cohesively||Components present and mostly well integrated||Most components present||Poor proposed design.|
|Evaluate/justific ation /5||Excellent comparison is made throughout this section.Outstandin g execution is made||Evaluate very good way||Good effort to evaluate but limited comparison||Little bit effort for comparison through web search.||Poor attempt to justify|
|Conclusion /5||Summarized the concept logically with strong arguments||Consistency logical and convincing||Good presentation of the summary||Moderate summary of the work.||Failed to summarize the work.|
|Reference style /5||Excellent reference style according to IEEE and most are relevant and recent||Good reference according to IEEE but some are old||Adequate reference most are old||Mix of reference style and old||Error in the reference style according of IEE and majority are irrelevant.|